ABC SW2-ANA Analogue signal booster
Analogue 0 to 10vdc signal booster to 200ma. The fast fit Analogue booster is designed to allow a larger number of VSd’s to be controlled as a group without loosing any of the 0 to 10VDC signal strength. you can control a sizable number of VSD,s in parallel arrangement.
Most 0 to 10VDC sensor outputs can not drive more than 10mA with this module you can control up to 200 mA. Although the module has 3 outputs you can connect several VSD’s Analogue inputs to each module output to for a total of 200mA
As an added bonus an output boost adjustment pot has been included, this is normally left at Zero boost, but if you have any voltage drop problems due to cable lengths you can boost the output voltage up to 2 volts extra @ 10VDC
Analogue 0 to 10vdc signal booster to 200ma. The fast fit Analogue booster is designed to allow a larger number of VSd’s to be controlled as a group without loosing any of the 0 to 10VDC signal strength. you can control a sizable number of VSD,s in parallel arrangement.
Most 0 to 10VDC sensor outputs can not drive more than 10mA with this module you can control up to 200 mA. Although the module has 3 outputs you can connect several VSD’s Analogue inputs to each module output to for a total of 200mA
As an added bonus an output boost adjustment pot has been included, this is normally left at Zero boost, but if you have any voltage drop problems due to cable lengths you can boost the output voltage up to 2 volts extra @ 10VDC
Analogue 0 to 10vdc signal booster to 200ma. The fast fit Analogue booster is designed to allow a larger number of VSd’s to be controlled as a group without loosing any of the 0 to 10VDC signal strength. you can control a sizable number of VSD,s in parallel arrangement.
Most 0 to 10VDC sensor outputs can not drive more than 10mA with this module you can control up to 200 mA. Although the module has 3 outputs you can connect several VSD’s Analogue inputs to each module output to for a total of 200mA
As an added bonus an output boost adjustment pot has been included, this is normally left at Zero boost, but if you have any voltage drop problems due to cable lengths you can boost the output voltage up to 2 volts extra @ 10VDC